Timer Edit
Date: Scheduled date. To edit it, highlight the Date item first and then press RIGHT key
to enter its editing state.
Program Name: Scheduled program. To edit it, highlight the Program Name item first
and then press RIGHT key to enter its editing state.
Start Time: Start time of schedule. To edit it, highlight the Start Time item first and then
press RIGHT key to enter its editing state.
End Time: Cannot be set by hand. When the Type item is set as either ‘VCR’ or
‘Recorder’, this parameter will auto change according to the Start Time and Duration
settings; when the Type item is set as others, this parameter is the same with the Start
Time.
Duration: Schedule duration. Available only when the Type item is set as ‘VCR’ or
‘Record’. To edit it, highlight the Duration item first and then press RIGHT key to enter its
editing state.
Mode: Schedule mode. Four options: Once, Daily, Weekly and Monthly.
Once: In this mode, the scheduled behaviour will happen only once at the specified
time. After that, the timer will be deleted.
Daily: In this mode, the scheduled behaviour will happen at the specified time every
day.
Weekly: In this mode, the scheduled behaviour will happen at the specified time
every week.
Monthly: In this mode, the scheduled behaviour will happen at the specified time
every month.
Type: Schedule type. Five options: Recorder, VCR, On, Channel and Standby.
Recorder: The system will record the scheduled program when the scheduled time is
reached. Users can select whether or not to record AD, TTX and Subtitle.
VCR: Similar to the Recorder type. But, AD, TTX and Subtitle will not be recorded.
VCR.
On: While in standby mode, the system will auto wake up and then play the
scheduled program if the scheduled time is reached.
Channel: The system will auto switch to the scheduled program to play when the
scheduled time is reached.
To Next Page
Loading...
