44
Rear power lift
The following operating conditions can be applied:
• Controlled position
• Controlled draught
• Floating mode
• Combined mode
Controlled position
Ideal for jobs that required constant
implement position (drills, scraper, hitched
manure spreader, etc.).
• Move lever B fully forwards.
• Use lever A, to raise and lower the lift.
Lift raising is proportionate to lever
movement.
Draft control
This is used to keep the lugging power the
tractor must provide constantly under
control without overloading the engine and
keeping slippage within very low limits
(ploughs, cultivators, etc.).
• Move lever A fully forwards.
• Use lever B to adjust the required
amount of draft.
• Use lever A to raise and lower the power
lift.
Floating mode
Ideal when you want to leave the
implement free to follow the contour of the
ground (cultivators, ridgers, scrapers, etc.).
• Move lever B all the way back.
• Use lever A to raise and lower the lift.
To Next Page
Loading...
