11
CAUTION:
3/8-16 X .625 SBHS, STAINLESS STEEL
1B-7189-00
QTY.4
29
HARDWARE NEEDED (ACTUAL SIZE)
USE 7/32” HEX KEY WRENCH TO INSERT 2
FRONT BUTTON HEAD SCREWS AND 2 BACK
BUTTON HEAD SCREWS (#29). TIGHTEN
SCREWS COMPLETELY AT THIS TIME.
NOTE
WITH THE HELP OF ANOTHER ADULT CAREFULLY
LIFT UPPER POLE (#3) AND SLIDE INTO LOWER
POLE (#2). HOLES IN POLES SHOULD LINE UP
WITH NO GAP BETWEEN POLES.
NOTE
2
3
PINCH POINTS! DO NOT place your
hand or any fingers in any of these
locations when inserting the pole.
KEEP CHILDREN AWAY FROM THE ASSEMBLY AREA.
TWO CAPABLE ADULTS ARE NEEDED FOR THE
FOLLOWING STEPS.
TOOLS NEEDED
7/32”
Packed in hardware kit.
29
29
To Next Page
Loading...
