goliath IGNITE B2256EF - Rim and Net Installation; Rim and Cover Plate Installation

HARDWARE NEEDED (ACTUAL SIZE)
29
3/8-16 X 1.50 CB, ZINC
1B-7187-00
28
QTY. 4
3/8 FLAT WASHER
2B-6114-00
QTY. 4
35
3/8-16 LOCKNUT
901-28
QTY. 4
42
9/16”
TOOLS NEEDED
28
#8 X 1/2" SCREW
1B-6788-00
QTY. 4
32
32
8
7
NEVER USE RIM WITH COVERPLATE REMOVED!
NOTE
TAKE PROTECTIVE COATING OFF THE
BACKBOARD BEFORE ATTACHING THE
RIM. LEVEL RIM AND FULLY TIGHTEN THE
HARDWARE. MAKE SURE TO INSTALL RIM
COVER PLATE WITH (#32) SCREWS.
Phillips
35
42
Note: Board arms not
shown for clarity.