33
12. Secure Post Pad (#53) to front of pole by wrapping straps around
pole and sticking to velcro on opposite side of Pad. Post Pad
NOTE: Do not cover the Warning Label on the front
of the pole with the Pole Pad.
should cover Post Screws but remain below Warning Label on the
front of the Pole. Make sure to reposition Pole Pad if sliding occurs.
NOTE: Top of Pole Pad (#53) should
cover Post Screws but remain
below Warning Label on the
front of the Pole.
53
Post Screws
Helpful hint: Periodically, use a vinyl protectant on
both the Pole Pad and Backboard Pads
to insure the best look and long life
To Next Page
Loading...
