Best installation area
Fasten the cable with card buckles
Connect the vehicle charger
4. Connect the Camera socket and vehicle charger with power cable.
Fasten the cable as suggested in the picture above. Once your
vehicle is started, the Camera will turn on automatically with an alert
tone indicating start of operation. (In certain types of vehicle, such as
Focus, GL8, Elysee, Cadillac CTS, etc., the cigar lighter does not cut
power automatically after the engine stops. Although the Camera will
enter sleep mode automatically to reduce power consumption, please
better unplug the charger during prolonged parking.)
Positions of card buckles
Route of fastening the cable
Wireless remote: Capture
nice videos anytime.
5. Attach the provided wireless remote on your steering wheel or
other convenient areas to t your need.
3
To Next Page
Loading...
