To Next Page

To Previous Page

 • Theproductmustbeattachedabsolutelystraight.

 • Plants,streetlighting,reectivesurfacesorrandomlymoving

objects must not be located in the detection range.

• The recommended mounting height is 2.2-4 m.

2. Drillaholeinsizeofthehousingofthemotionsensorintothewallor

ceiling with suitable tools.

3. Pressthemountingclampsuporbackwardstoeachotherandputthe

 motionsensorintothepreparedhole.

Fig . 10: Mounting

7 Settings

F i g. 11 : Settings

7.1 Changing settings

1. Tilttheinnerpartofthemotionsensoronthenutbyusingascrewdriver.

Fi g . 12 : Changing settings

2. Adjust the switch-off delay TIME by using a screwdriver between 10

seconds and 15 minutes.

Goobay 71362 User Manual

Questions and Answers: