Goodman ARUF30B14 Series - User Manual

RECOGNIZE THIS SYMBOL
AS A SAFETY PRECAUTION.
ATTENTION INSTALLING PERSONNEL
Prior to installation, thoroughly familiarize yourself with this Installation Manual.
Observe all safety warnings. During installation or repair, caution is to be observed.
It is your responsibility to install the product safely and to educate the customer on its safe use.
ARUF**14**/ARPT**14**
1 Important Safety Instructions
The following symbols and labels are used throughout this
manual to indicate immediate or potential safety hazards. It
is the owner’s and installer’s responsibility to read and com-
ply with all safety information and instructions accompanying
these symbols. Failure to heed safety information increases
the risk of personal injury, property damage, and/or product
damage.
ASPT**14**/ASUF**14**
AIR HANDLERS INSTALLATION & OPERATING INSTRUCTIONS
Contents
1 Important Safety Instructions .................................. 1
2 Shipping Inspection ................................................. 2
2.1 Parts ........................................................................3
2.2 Handling ..................................................................3
3 Codes & Regulations................................................ 3
4 Replacement Parts ................................................... 3
5 Pre-Installation Considerations .............................. 3
5.1 Preparation ..............................................................3
5.2 System Matches ......................................................3
5.3 Interconnecting Tubing ............................................3
5.4 Clearances ..............................................................3
5.5 Horizontal Applications ............................................4
6 Installation Location ................................................ 4
6.1 Upflow Installation....................................................4
6.2 Horizontal Left Installation .......................................4
6.3 Downflow/Horizontal Right Installation ....................5
7 Refrigerant Lines ...................................................... 7
7.1 Tubing Size ..............................................................7
7.2 Tubing Preparation ..................................................7
7.3 Special Instructions .................................................8
7.4 Tubing Connections for Flowrator Model .................8
7.5 Tubing Connections for TXV Models .......................8
8 Condensate Drain Lines........................................... 9
9 Ductwork ................................................................... 9
9.1 Return Ductwork ......................................................9
10 Return Air Filters .................................................. 10
11 Electric Heat .......................................................... 10
12 Electrical and Control Wiring............................... 12
12.1 Building Electrical Service Inspection .................. 12
12.2 Wire Sizing..........................................................12
12.3 Maximum Overcurrent Protection (MOP) ............12
12.4 Electrical Connections – Supply Voltage .............13
12.4.1 Air Handler Only (Non-Heat Kit Models) ....13
12.4.2 Air Handler - Non-Circuit Breaker Heat Kits .....13
12.4.3 Air Handler With Circuit Breaker Heat Kit.........13
12.5 Low Voltage Connections ....................................13
12.5.1 Thermostats ....................................................13
12.6 Speed Tap Adjustment.........................................13
13 Achieving 2% Low Leakage Rate ........................ 14
14 Start-Up Procedure ............................................... 14
15 Regular Maintenance............................................ 14
16 Airflow Data .......................................................... 15
21 Wiring Diagrams................................................... 21
IO-427K
10/2014

Summary

Important Safety Instructions

Pre-Installation Considerations

5.2 System Matches

Ensure system is manufacturer approved and AHRI listed; unmatched systems void warranty.

5.4 Clearances

Installation Location

6.3 Downflow;Horizontal Right Installation

Refrigerant Lines

7.4 Tubing Connections for Flowrator Model

7.5 Tubing Connections for TXV Models

Condensate Drain Lines

Drain Line Installation Requirements

Ductwork

Electric Heat

Electric Heat Kit Installation

Field installation of permitted HKS series kits; refer to specific manual.

Heating Mode Temperature Rise Data

Electrical and Control Wiring

12.1 Building Electrical Service Inspection

Verify single-phase supply voltage matches unit requirements.

12.2 Wire Sizing and Voltage Drop

Select wire size based on MCA and 2% voltage drop requirement.

12.3 Maximum Overcurrent Protection (MOP)

Install NEC/CEC approved overcurrent protection device sized appropriately.

12.4 Supply Voltage Electrical Connections

Use copper conductors, knockouts, and approved strain relief for supply voltage connections.

12.5 Low Voltage Connections

24V control voltage connects air handler to thermostat and condenser.

12.6 Blower Speed Tap Adjustment

Start-Up Procedure

Pre-Start Up Checks and Requirements

Ensure proper wiring, panel installation, leak-free tubing, and condensate trap.

Regular Maintenance

Airflow Data

ARUF;ARPT Models Airflow Specifications

ASPT Models Airflow Specifications

ASUF Models Airflow Specifications

Air Handler Low Voltage Connections

Wiring Diagrams

ARUF;ARPT Wiring Diagram Details

Wiring schematic for ARUF/ARPT models, including component codes and color codes.

ASPT;ASUF Wiring Diagram Details

Wiring schematic for ASPT/ASUF models, including component codes and color codes.

3-Phase Heat Kit Wiring Diagram

Wiring diagram for 3-phase heat kits, specifying speed tap and serial plate marking.

Homeowner Routine Maintenance Recommendations

Filter Replacement and Cleaning

Pre-Servicer Troubleshooting Steps

Basic troubleshooting steps before contacting a professional service technician.

Goodman ARUF30B14 Series Specifications

General

Model	ARUF30B14
Refrigerant	R-410A
Filter Size	16x20x1"
Height	44 inches
Motor Type	PSC
Nominal Cooling Capacity	2.5 Ton
Airflow	1200 CFM
Dimensions	Varies by specific model. Check product documentation for exact dimensions.
Width	21"
Depth	21"
Voltage	208/230V