Goodman GSC140481A User Manual

• Refer to Service Manual RS6100004 for installation, op-
eration, and troubleshooting information.
• All safety information must be followed as provided in the
Service Manual.
Models listed on page 3.
GSH 14 SEER
Remote Heat Pump
RT6213004
April 2006
This manual is to be used by qualified HVAC technicians only. Goodman
does not assume any responsibility for property damage or personal injury
due to improper service procedures performed by an unqualified person.
TECHNICAL INFORMATION MANUAL
Copyright © 2006 Goodman Manufacturing Company, L.P.
®

Goodman GSC140481A Specifications

General

Model Number	GSC140481A
Category	Heat Pump
Brand	Goodman
Cooling Capacity	48000 BTU/h
Tonnage	4 Ton
Refrigerant Type	R-410A
Number of Stages	Single Stage
Voltage	208/230V
Phase	1
Hertz	60 Hz
Compressor Type	Scroll
Sound Rating (Outdoor Unit)	76 dB
Nominal Heating Capacity (BTU/h)	48000 BTU/h
SEER Rating	14 SEER
HSPF Rating	8.2 HSPF
Operating Temperature Range (Cooling)	115°F

Summary

PRODUCT IDENTIFICATION

Model Number Breakdown

Explanation of alphanumeric codes in model numbers for unit identification.

Safety Warnings and Technician Qualifications

Critical safety warnings for high voltage and required technician qualifications.

PRODUCT DESIGN

GSH 14 SEER Split System Overview

Details on GSH 14 SEER split system heat pump models, capacities, and voltage.

Outdoor Unit Installation Guidelines

Guidance on unit placement, restrictions, and clearances for air circulation.

HEAT PUMP SPECIFICATIONS

EXPANDED PERFORMANCE DATA

Cooling Operation Performance Tables

Detailed performance data for cooling operation under various ambient and indoor conditions.

PERFORMANCE DATA

Performance Test Conditions and Variability

Information on performance test conditions, measurement, and factors affecting results.

SPLIT SYSTEM HEATING PERFORMANCE

Heating Operation Expanded Performance Data

Tables detailing heating performance across various ambient and indoor conditions.

HEATING SPECIFICATIONS

PERFORMANCE DATA INTERPRETATION

Test Interpretation and Operational Tolerances

Guidance on interpreting performance data and acceptable operational tolerances.

WIRING DIAGRAMS

Control Box Electrical Wiring

Diagram of control box wiring, including component codes and color codes.