- 11 -
TO SKIP BACK TO THE PREVIOUS TRACK ON A DISC
m For example to skip back to the beginning of track 3 while track 4 is playing.
m Twist the CD SKIP Control twice anticlockwise. Disc play will resume at the
beginning of track 3.
The CD player will skip back one track each time the CD SKIP is twisted. If this
control is twisted anticlockwise once in the middle of a track, the CD player will skip
back to the beginning of that track. To skip back to the previous track twist the
control anticlockwise again.
Repeatedly twisting the control anticlockwise will skip back through the disc track
by track. Once the beginning of the first track is reached, the CD player will not go
back any further.
DISC SKIP
m To skip to the next disc simply press the CD/DISC Skip Button, the unit will cycle
through position 1 - 2 - 3 - 1 - 2 . . . . . .etc
RANDOM PLAY
m To play all tracks on all discs in a random order, press the RANDOM button followed
by PLAY/PAUSE button.
REPEAT DISC PLAY
If the REPEAT Button is pressed during normal or programmed disc play the following
repeat functions are displayed in sequence in the CD Display.
REPEAT ALL DISC Repeats All the Tracks on All the Discs
REPEAT ONE DISC Repeats all the tracks on the Current disc.
REPEAT ONE Repeats the current track on the Current disc.
To cancel a repeat mode, keep pressing the REPEAT Button until the REPEAT Indicator is
turned off.
PROGRAMMED DISC PLAY
A CD programme can only be set when the CDs are stopped. A maximum of 40 tracks can
be programmed.
ENTERING A PROGRAM
1. Press the MEMORY Button, the CD Display will display the word Memory and
"0 0 P-00".
2. Select the disc that the first track to be programmed is on using the Disc Skip Button or
direct disc access button.
3. Select the desired track using the CD SKIP Control until the desired track is selected.
D036PD3R-Goodmans.p65 5/11/2004, 2:28 PM11
To Next Page
Loading...
