Goodmans XB25CDG - Listening to Tape; Playing Tapes; Continuous Playback

11
Any track can be programmed to play more that once.
If you press the Stop Button during PROGRAM mode, the entire program
will be erased from memory.
LISTENING TO PROGRAMMED TRACKS
Program your selection of tracks by following the procedure shown earlier.
Press the Play/Pause Button.
Disc play will start at the beginning of the first programmed track.
TO CLEAR THE PROGRAMME MEMORY
If the disc is playing, press the Stop Button.
Press the Stop Button again. All the programs will then be erased from memory.
The program memory will also be cleared if the Function Selector is changed to another
function, or if the power is switched off.
LISTENING TO TAPE
INSERTION AND REMOVAL OF CASSETTES
• Press the Stop/Eject Button to open the Cassette Door.
• Slip your cassette tape into the cassette door with the exposed section of tape at the
bottom (full spool on the left) and the playback side facing you.
• Push to close the Cassette Door securely before starting.
• When finished, press the Stop/Eject Key to open the Cassette Door, and retrieve you
cassette tape.
PLAYING TAPES
You can choose either Tape A or Tape B for playback.
• Selector the Tape Function.
• Insert your cassette tape.
• Press the Play Key to start the tape.
• Use the Pause Key whenever you want to suspend playback.
• Press the Stop/Eject Key when finished.
• Press Fast Forward or Rewind Keys to rapidly wind cassette.
CONTINUOUS PLAYBACK
• Insert two cassette tapes.
• Press the Play Key of deck B.
• Press the Pause Key followed by the Play Key of deck A.
• Deck B will play while Deck A waits.