12
• Adjust the Volume Control to the appropriate level.
• When Tape B reaches the end and stops, Tape A starts playing back automatically.
• When Tape A reaches the end, it will automatically stop.
RECORDING
RECORDING FROM CD
• Select the CD FUNCTION , and insert your disc.
• Press the Record Key and Play Key at the same time to start recording.
• Press the CD Play/Pause Button to start the disc.
• Press the Stop/Eject key when disc/recording is finished.
TAPE-TO-TAPE RECORDING(DUBBING)
NORMAL SPEED DUBBING
• Insert a fully rewound pre-recorded cassette into Tape Deck B.
• Insert a fully rewound blank cassette tape into Tape Deck A.
• Select the TAPEFUNCTION .
• Press the Pause Key and then the Play and Record Keys of Tape Deck A.
• Press the Play Key of Tape Deck B. The contents of the tape in Deck B will now be
copied onto the tape in Deck A.
• Adjust the Volume Control to the desired level for monitoring purposes. The recording
level will be unaffected by changes in volume.
• To stop recording, press both of Stop/Eject Keys.
HIGH SPEED DUBBING
• Set the High Speed Key to ON position.
• Follow the steps described above for Normal Speed Dubbing. Monitoring is not possible.
Notes: If the length of the tape in Deck B is shorter that in Deck A, the Play Key of
Deck B will be released automatically at the end of the tape. Tape A will
continue to record until the tape reaches it end, or its Stop/Eject Key is
pressed.
If the length of the tape in Deck A is shorter than that in Deck B. The
Record and Play Keys of Deck A will be released automatically at the end
of tape. Tape B will continue to Play until the tape reaches its end, or its
Stop/Eject Key is pressed.
To Next Page
