EasyManua.ls Logo

GOODRICH Stormscope WX-950 - Manual Structure and Scope

Default Icon
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A
Rev. C
ABOUT THIS MANUAL
Chapter 1 – General Information
This chapter includes equipment specifications and a functional description. It describes the various hardware
configurations and includes a list of items furnished and items required but not supplied with the equipment.
Chapter 2 – Installation
This chapter contains instructions for unpacking the equipment and inspection for in-shipment damage. It also
includes information required to locate, assemble and install the equipment.
Chapter 3 – Installation Checkout
This chapter contains instructions for doing post-installation and return to service checkout of the WX-950 using
the Goodrich Avionics SystemsWX-PA Portable Analyzer Kit.
Chapter 4 – Maintenance
This chapter contains general flightline maintenance procedures. It includes periodic maintenance and
troubleshooting; and instructions for the return of defective components.
Appendix A – Signal and Cable Characteristics
This appendix defines the electrical characteristics of all input and output signals.
© Copyright 1996-2001
Goodrich Avionics Systems, Inc.
____________________________
Trademarks
Stormscope® is a registered trademark of Goodrich Avionics Systems, Inc.
Mylar ® and Teflon® are registered trademarks of Dupont.

Related product manuals