EasyManua.ls Logo

Goodway Ream-A-Matic - User Manual

Goodway Ream-A-Matic
14 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RAM-PRO-XL
VARI-SPEED REVERSING
REAM-A-MATIC TUBE CLEANER
WITH CHEMICAL DISPENSER
Operating and
Maintenance
Instructions
Read before operating.

Table of Contents

Questions and Answers

  • M
    Matthew MillerAug 5, 2025
    Why is water leaking from the base of my Goodway Ream-A-Matic Cleaning Equipment?
    • J
      Joseph CarterAug 5, 2025
      If you notice water leaking from the base of your Goodway Cleaning Equipment, there are several potential causes. It could be a leak in the water circuit plumbing. To address this, disconnect the power and remove the cover to inspect hoses and fittings for leaks. Another possibility is a leak at the shaft manifold seal; check the area where the driveshaft enters the shaft manifold. Finally, the water pressure might be too high, in which case you should lower the water pressure.
  • S
    Sarah WilsonAug 14, 2025
    What to do if Goodway Ream-A-Matic runs briefly then stops and the GFCI trips?
    • E
      Emily HolmesAug 15, 2025
      If your Goodway Cleaning Equipment runs for a short period and then stops (with the power light off) and the GFCI trips and won't reset, this indicates an electrical short to ground. If the GFCI continually trips, it is important to call Goodway, as there may be an unsafe electrical condition.
  • J
    Jennifer WalkerAug 25, 2025
    How to troubleshoot a Goodway Cleaning Equipment motor that jerks or runs erratically?
    • N
      Nicholas OconnorAug 26, 2025
      If the motor of your Goodway Cleaning Equipment jerks or runs erratically, it could be related to the speed control. Check the speed control potentiometer by checking the resistance across the outer leads (should be approximately 5K ohms). Also, check the resistance between the middle and outer lead while rotating the speed control (should vary from 0 to 5K ohms). Another potential cause is the control board. Refer to the wiring diagram and check the trimmer pot settings.

Summary

Safety Information

Important Safety Instructions

Essential safety guidelines before operating the equipment.

Electrical Precautions

Critical safety measures related to electrical connections and usage.

Operational Precautions

Safety rules and best practices for running the tube cleaning machine.

System Overview

The RAM-PRO-XL Ream-A-Matic

Explanation of the machine's function, speed control, and foot pedal operation.

Operation and Maintenance

Operation

Step-by-step instructions for connecting and running the tube cleaner.

Chemical Dispenser and Roll Cage

Procedures for using the chemical dispenser and operating the roll cage/handle.

Connecting the SQC Flexible Shaft

Detailed steps for attaching and securing the flexible shaft.

Storage and Maintenance

Guidelines for storing the unit and performing routine maintenance checks.

Technical and Troubleshooting

Wiring Diagram

Visual schematic of the machine's electrical system.

Troubleshooting

Common problems, causes, and solutions for the tube cleaner.

Exploded View and Parts List

Visual breakdown of components and a comprehensive list of parts.

Goodway Ream-A-Matic Specifications

General IconGeneral
BrandGoodway
ModelReam-A-Matic
CategoryCleaning Equipment
LanguageEnglish

Related product manuals