English • Owner´s manual
31
• Always wear protective gloves and mask!
• Release the compressor pressure to avoid material damage. You can, for example, connect a compressed
air blow gun to the compressor and thus empty the pressure tank.
• Replace the oil after the first 100 hours of operation and every 300 hours thereafter (Fig. 14). Remember
to check the oil level at regular intervals. Use SAE 15W-40 premium quality oil.
• To protect it from dirt, the compressor should be covered after each use. The packaging can be used to
store the compressor.
• Do not cover the compressor until it has cooled down completely.
• Store the compressor and its instruction manual together. Store the machine and its accessories in a
dark, dry, dust-free and frost-free place.
MAINTENANCE
FUNCTION AFTER THE FIRST 100 HOURS EVERY 100 HOURS EVERY 300 HOURS
Cleaning of the inlet lter and/or replacement
of the lter element
-
Oil change
- -
Tightening of the head tension rods At start-up and after the rst hour of operation
Tank purge Periodically and at the end of the work
Environmental protection
Take the machine to a clean point. Do not reuse components as spare parts as they may be damaged.
Ensure that parts such as oils, cables and similar do not come into contact with the environment at the
end of their service life. The compressor must be disposed of in accordance with the methods provided
for by local regulations.
Exhausted and condensed oil MUST BE DISPOSED of in accordance with environmental protection
standards and current legislation.
Waste electrical products should not be disposed of with normal household waste.
Recycle at appropriate facilities. Consult your local authority or retailer for recycling
advice.
Do not place packaging in ordinary garbage for disposal, be sure to recycle the
cardboard. Recycle unwanted materials instead of disposing of them as waste. All
tools, hoses and packaging should be sorted, taken to the local recycling center and
disposed of in an environmentally safe manner.
Fig. 15
Fig. 16
To Next Page
Loading...
