Need help?Do you have a question about the Gooxi RMC2108-670-HS and is the answer not in the manual?
General| Form Factor | 2U Rackmount |
|---|---|
| Operating System Support | Windows Server, Linux |
| CPU | Dual Intel Xeon Scalable Processors |
| Network | Dual Gigabit Ethernet |
| RAID Support | RAID 0, 1, 5, 10 |
| Power Supply Wattage | 800W |
Details the physical components and layout of the Gooxi RMC2108-670-HS server chassis.
Explains the construction and layout of the server chassis's rear panel, including I/O ports.
Lists the screws, labels, and other hardware included in the server chassis package.
Presents a visual representation of the front view of the Gooxi RMC2108-670-HS server chassis.
Details the buttons and LED indicators found on the server chassis's front panel.
Explains the functions and status descriptions of hard disk activity, fault, and status LEDs.
Provides a general introduction and description of the Gooxi backplane model RMC2108-BP-12G.
Illustrates and describes the SAS output interfaces on the server backplane for hard disk connections.
Details the sequential steps required to safely remove the cover of the Gooxi 2108 server chassis.
Explains the procedure for inserting and removing 3.5-inch hard drives from the chassis's drive bays.
Details the step-by-step process for installing the power supply units into the Gooxi2108 chassis.
Explains the steps for installing the motherboard, including stud placement, onto the Gooxi 2108 chassis.
Guides the installation of two 2.5-inch non-hot swappable hard disk drives using an expandable bracket.
Guides the installation of two rear 2.5-inch hot-swappable hard disk modules into the chassis.
Details the fundamental technical specifications of the Gooxi RMC2108-670-HS server chassis.
Lists user-facing parameters like front panel interface details and cabinet fixing mode.
Provides detailed configuration parameters including product material and chassis dimensions (depth, width, height).
To Next Page