Need help?Do you have a question about the Gooxi ASR4110G-D04R-G2 and is the answer not in the manual?
General| Form Factor | 1U Rackmount |
|---|---|
| CPU Socket | Dual Socket LGA 3647 |
| Chipset | Intel C621 |
| Maximum Memory | 2TB |
| SATA | 6Gb/s |
| Memory Type | DDR4 |
| Memory Slots | 16 x DIMM |
| Drive Bays | 4 x 3.5" |
| SAS | 12Gb/s |
| Network Interface | 2 x 1GbE |
Provides a high-level summary of the server's features and capabilities.
Details the physical layout and key components of the server, including a diagram.
Explains the motherboard's block diagram and key connectivity features.
Lists detailed technical specifications for the server models.
Describes the appearance, indicators, buttons, and interfaces on the front of the server.
Details the appearance, indicators, buttons, and interfaces on the rear of the server.
Information regarding supported CPU types and configurations.
Details memory slot locations and compatibility information.
Information about hard drive configurations and types.
Details supported power supply modules, redundancy, and hot-swap capabilities.
Information on fan modules, hot-swap, and variable fan speed.
Covers PCIe slot locations and descriptions.
Identifies key components and connectors on the motherboard.
Describes the connectors and functions of the 2.5-inch rear hard drive backplane.
General section for installing various server components.
Step-by-step guide for installing the CPU into the server.
Instructions for correctly installing the CPU heatsink.
Steps for installing a Graphics Processing Unit (GPU) into the server.
Guide on how to install DDR4 memory modules into the motherboard slots.
Instructions for mounting the server into a rack using slide rails.
Steps for the initial setup and configuration of the server.
Detailed procedure for powering on the server and checking status.
Provides default account, password, and address information for BMC and BIOS.
Guidance on accessing and configuring the BIOS setup utility.
Instructions for configuring the Baseboard Management Controller (BMC) network settings.
Introduces the general troubleshooting section for common server issues.
Steps to diagnose and resolve issues when the display remains blank after powering on.
Explains how to interpret front panel indicator lights for system status and alarms.
Guidance on diagnosing hard drive issues based on indicator light status.
Troubleshooting steps for RAID card installation and functionality problems.
Steps to troubleshoot and resolve issues with IPMI network connectivity.
To Next Page