Gooxi ASR4110G-D04R-G2 - 2.3 Processor; 2.4 Memory

11
2.2.2 Indicator lights and buttons
⚫ Rear Panel Indicators
Figure 2-5
No.
Name
No.
Name
1
Power module indicator
4
Network port connection status
indicator
2
Management network port
connection status indicator
5
Network port data transmission
status indicator
3
Management network port data
transmission status indicator
6
UID indicator
Table 2-6
⚫ Description of Power Module Indicator
Indicator light/
button
status description
Power module
indicator
Green (steady on): Indicates that the input and output are
normal.
Orange (steady on): Indicates that the AC power cord is
unplugged or the power module is missing, and only one
power module in parallel has AC input; power module
malfunction causing output shutdown, such as OVP, OCP,
fan failure.
Gre en (1 Hz /flashing): Indicates that the input is normal,
the voltage is too low (less than 12 V) or the power supply
is in the smart open state.
Green (2 Hz /flashing): Indicates that the Firmware is being
upgraded online.
Orange (1 Hz /flas hing): Power supply warning event
indicating continuous power supply operation, high
temperature, high power, high current.
Off: Indicates no AC power input.
Table 2-7