Need help?Do you have a question about the Gooxi SL201-D12RE-G3 and is the answer not in the manual?
General| Form Factor | 2U Rackmount |
|---|---|
| Storage Bays | 12 x 3.5" |
| RAID Support | RAID 0, 1, 5, 6, 10 |
| Network Interface | 2 x Gigabit Ethernet ports |
| Power Supply | Redundant 800W |
| Management | IPMI 2.0 |
| Operating System Support | Linux |
Detailed safety precautions for preventing property damage and personal injury.
Highlights key features including CPU, memory, expansion slots, and networking.
Step-by-step guide for installing the CPU onto the motherboard and heat sink.
Instructions for mounting the CPU heat sink correctly.
Details on memory support specifications and the procedure for installing memory modules.
Provides a visual guide for correctly inserting DIMM modules into slots.
Guide for installing 3.5-inch and 2.5-inch hard drives into their trays.
Instructions for attaching inner slide rails to the server chassis.
Steps for mounting outer rails onto the server rack cabinet.
Guide for sliding the server chassis into the rack using the installed rails.
How to access the BIOS setup utility during server boot.
Instructions for configuring RAID using the PCH SATA controller.
Step-by-step guide to create and manage RAID volumes in UEFI mode.
Steps for configuring RAID volumes using the legacy boot mode.
Instructions for configuring RAID using a dedicated RAID card.
Guide to creating RAID volumes on a RAID card in UEFI mode.
Steps to configure RAID on a card in legacy boot mode.
Overview of the IPMI deployment process and required steps.
How to access and use the IPMI management interface.
To Next Page