Need help?Do you have a question about the Gooxi SL101-D04R-G3 and is the answer not in the manual?
General safety guidelines and precautions for operating the server.
Information on hazardous substances, environmental compliance, and operating conditions.
Crucial operational notes regarding altitude, climate, and general handling.
Introduction to the server series and its key features.
Detailed overview of front, rear, motherboard, HDD backplanes, and fans.
Information on DIMM slots, hard disk labels, and hard disk indicators.
Step-by-step guides for installing the CPU and heat sink.
Specifications and steps for installing memory modules.
Procedures for installing 3.5-inch and 2.5-inch hard drives.
Guides for installing M.2 SSD, PCI-E cards, and modules.
Steps for installing rear hard disk modules, power, and fan modules.
Procedures for mounting inner/outer rails and installing the server into the rack.
Instructions to enter BIOS and navigate its menus.
Overview of Advanced, Processor, Memory, and Power Management settings.
Settings for Network Stack, iSCSI, BMC network, and platform config.
BIOS security settings and boot order configuration.
Configuring RAID using PCH SATA controller in UEFI/Legacy modes.
Configuring RAID via RAID card in UEFI/Legacy modes.
Locating disks, initializing, erasing, and managing RAID configurations.
Overview of IPMI deployment steps and BIOS configuration.
Accessing and using IPMI management interface, including KVM and SOL.
Information on IPMI drivers, tools, and connection methods.
General safety guidelines and precautions for operating the server.
Information on hazardous substances, environmental compliance, and operating conditions.
Crucial operational notes regarding altitude, climate, and general handling.
Introduction to the server series and its key features.
Detailed overview of front, rear, motherboard, HDD backplanes, and fans.
Information on DIMM slots, hard disk labels, and hard disk indicators.
Step-by-step guides for installing the CPU and heat sink.
Specifications and steps for installing memory modules.
Procedures for installing 3.5-inch and 2.5-inch hard drives.
Guides for installing M.2 SSD, PCI-E cards, and modules.
Steps for installing rear hard disk modules, power, and fan modules.
Procedures for mounting inner/outer rails and installing the server into the rack.
Instructions to enter BIOS and navigate its menus.
Overview of Advanced, Processor, Memory, and Power Management settings.
Settings for Network Stack, iSCSI, BMC network, and platform config.
BIOS security settings and boot order configuration.
Configuring RAID using PCH SATA controller in UEFI/Legacy modes.
Configuring RAID via RAID card in UEFI/Legacy modes.
Locating disks, initializing, erasing, and managing RAID configurations.
Overview of IPMI deployment steps and BIOS configuration.
Accessing and using IPMI management interface, including KVM and SOL.
Information on IPMI drivers, tools, and connection methods.
To Next Page
General