103
Figure 5- 40
SEL Components
Start-up process system event recording function control switch, menu options:
Enabled
Disabled
Default: Enabled
Erase SEL
Clear system event log control switch, menu options:
No: do not clear
Yes, On next reset
Yes, On every reset
Default: No
When SEL is Full
When the system event record storage space is full, operate the control switch, menu options:
Do Nothing
Erase Immediately
Default: Do Nothing
Log EFI Status Codes
Configuration records EFI Status Codes, menu options:
Disabled: Do not record
Both: Record Error code & Progress code
Error code: Only record Error code
Progress code: Record only Progress code
Default value: Error code
5.2.40 BMC network configuration menu
To Next Page
Loading...
Need help?
General
