84
5.2.25 UPI Configuration
Figure 5- 26
UPI Status: UPI link status submenu, showing the current UPI link status
Degrade Precedence
When the system settings conflict, you can lower the feature by setting Topology Precedence, or
lowering the Topology by setting Feature Precedence. The menu options are:
Topology Precedence
Feature Precedence
Default: Topology Precedence
Link Speed Mode
Link speed mode setting, the menu options are:
Slow
Fast
Default: Fast
Link L0p Enable
Link L0p switch, the menu options are:
Disable
Enable
Auto
Default: Auto
Link L1 Enable
Link L1 switch, menu options are:
Disable
Enable
Auto
Default: Auto
To Next Page
Loading...
Need help?
General
