3.1.4 Installation of memory
The motherboard supports 8 DDR4channels,each channel supports1 DIMM, and 2 CPUs support a total of
16 DDR4 slots (When only one memory is inserted, it is preferred to insert the slot in the red
frame in the figure below).
Note that the notch of the memory is consistent withthe notch of the DIMM slot. Insert each DIMM module
vertically into place to prevent incorrectinstallation.
Figure 3-6
Figure 3-7
3.1.5 Installation of server slide rail
⚫ Step 1: Prepare two slide rails and pull out the inner rail.
To Next Page
Loading...
