1.4 Product Specifications
4U10-GPU 4-bay rackmount server
4U10-GPU 10-bay rackmount server
790mm*433mm*176.5mm (D*W*H)
Support 2 AMD EPYC 7003/7002/7001 series processors
Support 16pcs DDR4 ECC RDIMM/LRDIMM memory, memory frequency support
2133/2400/2666/2933MHz, support a single maximum capacity of 256GB, and a
maximum total memory capacity of 4TB.
1 M.2 interface, 2 MiniSAS HD interfaces
Support four 3.5/2.5 inch SAS/SATA
hard drives
Support ten 2.5-inch SAS/SATA hard drives
Standard two 2.5-inch SAS/SATA hard drive bays (expandable to four), optional 2 or 4
U.2 hard drive expansion slots at the rear.
Front: 2 USB 2.0, 1 power button, 1 reset button, 1 hard drive indicator, 1 system
Fault lights, 2 network lights.
Rear: 1 VGA, 2 USB3.0, 1 management network port, 2 RJ45 Gigabit network ports, 1
COM port.
Fro nt : supports 10* full-height PCIe double-width slots; Rear: supports
10* half-height PCIe single-width slots.
1200W, 1300W, 1600W, 2000W, 2200W 3+1 redundant power supply
(select the power module according to the actual power consumption of the
whole machine)
The center is equipped with eight 8038 hot-swappable fans; the rear is
equipped with three 8038 hot-swappable fans.
1 dedicated RJ45management network port
Working
Temperature
and Humidity
Temperatu re 5℃~35 ℃/humidity 20%~80% RH no n- condensing
Storage
Temperature
and Humidity
Short-term storage (≤72 H): temperature -40°C~70°C/humidity
20%~90% RH non-condensing (including packaging
Long-term storage (>72 H): temperature 20°C~28°C/humidity 30%~70%
RH non-condensing (including packaging)
Table 1-3
Note:
* Support AMD EPYC 7003/7002/7001 series CPU, require different firmware.
* The number and type of hard drives are subject to the actual configuration.
To Next Page
Loading...
