Gooxi RMC2108-670-HS - Power Supply Unit Installation

Shenzhen Gooxi Hengyu Technology Co., Ltd
2.3 Introduction to the Installation Steps of Gooxi2108 Chassis Power Supply
(1) Place the power supply case to the chassis according to the hole site, as shown in
the figure below
(2) Install the power to the chassis according to the correct position, and then screw
on the power supply screws at the position marked below.
(3) Fix the power supply bracket, and screw on the screws at the position marked in
All manuals and user guides at all-guides.com