18 19
BURST
In Burst mode your camera takes multiple photos in short time
intervals3 photos/1 second, 5 photos/1 second and 10 photos/
1 second.
To capture a Burst photo series, verify that the camera is in Burst
mode. If the Burst icon [
] does not appear on your camera status
screen, press the
Power/Mode button [
] repeatedly until it appears.
To Capture Burst Photos:
Press the Shutter/Select button [
]. The red camera status lights
flash and the camera beeps multiple times.
The camera status screen displays BUSY while the camera processes
these files. Once BUSY disappears, the camera is ready for the next action.
See Options in Camera Settings for interval settings.
/ Camera Modes
PHOTO
To capture a photo, verify that the camera is in Photo mode. If the
Photo icon [
] does not appear on your camera status screen,
press the
Power/Mode button [
] repeatedly until it appears.
To Capture a Photo:
Press the Shutter/Select button [
]. The camera beeps two
times, the red camera status lights flash and the counter on the
camera status screen increases by one.
See Photo Resolution Modes in Camera Settings for photo
resolution settings.
/ Camera Modes
To Next Page
Loading...
