40 41
To Turn Off One Button Mode:
1. Power the camera on. Video or Time Lapse capture
automatically begins.
2. Press and hold the Shutter/Select button until [
] appears
in the camera status screen.
3. Press the Shutter/Select button [
] to enter.
4. Use the
Power/Mode button [
] to highlight OFF.
5. Press the Shutter/Select button [ ] to select it.
6. To exit, hold down the Shutter/Select button [ ] for two seconds
or cycle through to [
] and press the Shutter/Select button [ ].
/ Set Up
/ Set Up
NTSC/PAL
The NTSC and PAL settings govern video recording frame rate and
playback when viewing video on a TV/HDTV. Select NTSC when
viewing on a TV/HDTV in North America. Select PAL if viewing on
a PAL TV/HDTV (most televisions outside of North America) or if
viewing on a PAL TV/HDTV in any region.
NTSC (Default) PAL
1080p/60 fps 1080p/50 fps
1080p/30 fps 1080p/25 fps
960p/60 fps 960p/50 fps
960p/30 fps 960p/25 fps
720p/120 fps 720p/100 fps
720 p/60 f ps 720p/50 fps
720p/30 fps 720p/25 fps
WVGA/120 fps WVGA/100 fps
W VGA /60 f ps WVGA/50 fps
To Next Page
Loading...
