GoPro Hero4 session - SETUP; Insert microSD Card and Charge; OPERATING THE CAMERA; Record Video

Open the side door and
insert a microSD card.
(Requires at least a Class 10 or UHS-I
microSD card up to 64GB, sold separately.)
Charge using the included
USB cable. The red status
light turns off when fully
charged.
1
2
RECORDING VIDEO
To power on the camera and
record video, short press the
Shutter/Select [ ] button.
SHOOTING TIME LAPSE PHOTOS
To power on the camera and
shoot Time Lapse photos, press
and hold the Shutter/Select [ ]
button until recording begins.
STOPPING + POWERING OFF
Short press the Shutter/Select
[ ] button. The camera stops
recording and powers off.
SETUP
POWERING ON
+ RECORDING
INFO/WIRELESS BUTTON
Change video and Time
Lapse settings, get status
info, and connect to the
GoPro App or Smart Remote
(sold separately).