Do you have a question about the GoPro Hero4 session and is the answer not in the manual?
Camera Resolution | 8 MP |
---|---|
Video Resolution | 1440p30, 1080p60, 960p60, 720p100 |
Photo Resolution | 8 MP |
Aperture | f/2.8 |
Burst Photo | 10 photos per second |
Time Lapse | 0.5, 1, 2, 5, 10, 30, 60 second intervals |
Audio Recording | Yes |
Battery Life | Up to 2 hours |
Connectivity | Wi-Fi, Bluetooth |
Ports | Micro USB |
Memory Card Type | MicroSD (up to 64GB) |
Weight | 74 g |
Lens | Ultra-wide angle glass lens |
Waterproof | Up to 10m (33ft) without a housing |
Battery | Built-in rechargeable lithium-ion battery |
Image Sensor | Not specified by manufacturer |
Dimensions | 38 x 38 x 36mm |
Insert a microSD card and charge the camera using the USB cable until the status light turns off.
Power on the camera and start video recording by pressing the Shutter/Select button.
Power on and shoot Time Lapse photos by holding the Shutter/Select button until recording begins.
Short press the Shutter/Select button to stop recording and power off the camera.
Navigate settings using Info/Wireless and Shutter/Select buttons to adjust video and Time Lapse options.
Download and open the GoPro App, then follow on-screen instructions for pairing and camera setup.
Utilize included frames for attaching the camera to various GoPro mounts, such as helmets or surfaces.
Open the frame latch, slide the camera in ensuring it sits flush, and close the latch securely.
Adjust camera position using the Shutter/Select button orientation and the Ball Joint Buckle for capture angles.
Use the GoPro App to view, share, and GoPro Studio to import and edit videos for enhanced content.
Keep the lens clean, ensure the side door is closed securely for waterproofing, and rinse/dry after water use.
Update your camera, create an account, download the manual, watch videos, and contact customer support.