16
To Pair Your Remote and Your HERO3+ or HERO3:
1. Ensure that both camera and remote are powered off.
2. On your camera, complete these steps:
a. Press the Power/Mode button [
] to power on your camera.
b. Press the Wi-Fi On/Off button [ ] twice to turn on Wi-Fi and
access the Wi-Fi menu.
c. Press the Shutter/Select button [
] to open the Wi-Fi menu [ ].
d. Use the Power/Mode button [ ] to cycle to Wi-Fi RC, and then
press the Shutter/Select button [
].
e. Use the Power/Mode button [ ] to cycle to New, and then
press the Shutter/Select button [
]. This icon appears while
the camera searches: [
]
To Next Page
Loading...
