GoPro Wi-Fi Remote User Manual

To connect the Original HD HERO + Wi-Fi Remote:
1. Place both your Original HD HERO and Wi-Fi
BacPac into Connection Mode:
a. Make sure your Wi-Fi BacPac is attached to your
camera and powered ON.
b. Press POWER/MODE button to cycle
through to the HD HERO camera’s
Settings menu. Press SHUTTER/
SELECT to enter.
c. Press POWER/MODE button to toggle
down to the Wi-Fi Menu. Press
SHUTTER/SELECT to enter.
d. Press SHUTTER/SELECT to select
REMOTE.
e. If connection is successful, you will see
the following connection screen.
f. If connection was not successful, you will
see the following screen. Please repeat
the steps above.
To connect the Original HD HERO + Wi-Fi Remote:
1. Place both your Original HD HERO and Wi-Fi
BacPac into Connection Mode:
a. Make sure your Wi-Fi BacPac is attached to your
camera and powered ON.
b. Press POWER/MODE button to cycle
through to the HD HERO camera’s
Settings menu. Press SHUTTER/
SELECT to enter.
c. Press POWER/MODE button to toggle
down to the Wi-Fi Menu. Press
SHUTTER/SELECT to enter.
d. Press SHUTTER/SELECT to select
REMOTE.
e. If connection is successful, you will see
the following connection screen.
f. If connection was not successful, you will
see the following screen. Please repeat
the steps above.
Connecting: GoPro Cameras + Remote
11

GoPro Wi-Fi Remote Specifications

General

Brand	GoPro
Model	Wi-Fi Remote
Category	Camera Accessories
Language	English