Connecting: GoPro Cameras + Remote
To connect HD HERO2 + Wi-Fi Remote:
1. Put your camera into Connection Mode:
a. Make sure your Wi-Fi BacPac is attached to your
HD HERO2 camera and both are powered ON.
b. Press POWER/MODE button on the
Wi-Fi BacPac to enter the camera’s Wi-Fi
Menu screen.
c. Press SHUTTER/SELECT to enter the Wi-Fi
Connection Menu.
d. Use POWER/MODE button to highlight
New WiFi RC. Press SHUTTER/
SELECT.
e. The Wi-Fi connection icon will appear
indicating that the Wi-Fi BacPac is
searching for a connection. Press
SHUTTER/SELECT at any time to cancel.
9
To Next Page
Loading...
