Why does the Gorenje GS673C60W control panel not react when pressed?
M
Matthew JonesAug 7, 2025
The Gorenje Dishwasher control panel might not respond due to several reasons:
* You may have pressed the control panel too soon after closing the door. Wait a moment and try again.
* The door is open. The control panel only works when the door is closed.
* Child lock or Automatic child lock might be activated.
* There may be dirt on the control panel. Clean it with a dry or slightly damp cloth.
E
Erin AndersonAug 13, 2025
What to do if Gorenje Dishwasher is overfilling with water?
A
adamsbrandonAug 13, 2025
If your Gorenje Dishwasher is overfilling with water:
* Unblock the drainage pump.
* Turn off the water tap.
S
Stacy JonesAug 19, 2025
What to do if there is water inlet fault in Gorenje Dishwasher?
B
Brandon MartinAug 19, 2025
If you're experiencing a water inlet fault with your Gorenje Dishwasher:
* Check that the water tap is on.
* Check that the outer filter on the inlet hose is not blocked.
A
April LewisAug 25, 2025
What to do if there is inlet valve leakage in Gorenje GS673C60W?
D
Dylan MartinAug 25, 2025
If there's an inlet valve leakage in your Gorenje Dishwasher, turn off the water tap.
C
Christopher DavisAug 30, 2025
What to do if there is heater fault 1 in Gorenje GS673C60W?
Q
qwebbAug 30, 2025
If there is a heater fault 1 in your Gorenje Dishwasher, turn off the water tap and remove the plug from the wall socket.
To Next Page
General
