How to fix F12 error on Gorenje GS693C60XUVAD?
If your Gorenje Dishwasher displays the F12 error, it indicates a water inlet fault. First, make sure that the water tap is turned on. Then, check the outer filter on the inlet hose for any blockages. Refer to the 'Unblocking the inlet hose filter' section in the Care and cleaning chapter for instructions.
What to do if Gorenje GS693C60XUVAD shows F67 error?
If your Gorenje Dishwasher displays the F67 error, it means there's an issue with the water inlet. Ensure that the water tap is fully open. Also, inspect the outer filter on the inlet hose for any obstructions. For detailed instructions, see 'Unblocking the inlet hose filter' in the Care and cleaning chapter.
How to solve Gorenje GS693C60XUVAD Dishwasher F10 error?
If your Gorenje Dishwasher displays the F10 error, it indicates overfilling of water. You should clear the drainage pump. Refer to the Care and cleaning chapter for instructions.
What does F52 mean on Gorenje GS693C60XUVAD Dishwasher?
If your Gorenje Dishwasher is showing the F52 error, it means there is a water level fault. Try cleaning the coarse and fine filters. Also, check the outer filter on the inlet hose to make sure it is not blocked.
What does error F11 mean on my Gorenje Dishwasher?
If your Gorenje Dishwasher is displaying error code F11, it means there is a water outlet fault. See "Water remains in the dishwasher" under "Problem" in the table below.
Why is the control panel on my Gorenje Dishwasher not working?
If the control panel on your Gorenje Dishwasher isn't responding, it could be due to several reasons. First, if you've just closed the door, wait a moment before pressing the control panel. The control panel only works when the door is closed. Check if the Child lock or Automatic child lock is activated. Also, the control panel may not respond if it is dirty, so clean it with a dry or slightly damp cloth.
What should I do if my Gorenje Dishwasher shows F54 error?
If your Gorenje Dishwasher displays the F54 error, it indicates overfilling of water. Turn off the water tap. To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!
What does F40 error mean on Gorenje GS693C60XUVAD?
If your Gorenje Dishwasher displays the F40 error, it indicates an inlet valve leakage. Turn off the water tap.
What to do for Gorenje GS693C60XUVAD Dishwasher Heater fault F41?
If your Gorenje Dishwasher displays the F41 error, it indicates a heater fault. Turn off the water tap and remove the plug from the wall socket.
General| Brand | Gorenje |
|---|---|
| Model | GS693C60XUVAD |
| Category | Dishwasher |
| Language | English |
To Next Page
