Gorenje GV62010 User Manual

Troubleshooting
Type of fault on the display
Action
The Rinse light
flicker fleetly
Water Inlet Fault
Check that the water tap is on. Check that the outer filter on the inlet hose is not
blocked. If the problem persists, call the service department.
The Rinse and
Quick light flicker
fleetly
Not reaching required
temperature
Call the service department.
The ECO light
flicker fleetly
Overfilling
Turn off the water tap and call the service department.
Press any button to clear the error message.
11
Problem
Possible causes
Action
The buttons do not react when pressed.
Y ou have pressed the buttons too soon
after opening the door .
W ait a moment then try again.
The buttons are dirty .
Clean with a dry or slightly damp cloth.
The door is closed.
Open the door . The buttons only react
to use when the door is open.
Cannot close door .
The baskets are not correctly positioned.
Check that the baskets are correctly
positioned horizontally .
Check that the dishes are not blocking
the baskets from sliding properly into
place.
The dishwasher does not start.
The door is not properly closed.
Check.
Y ou have opened the dishwasher to add
more dishes while a programme is in
progress.
Close the door and wait. After a while,
the dishwasher continues the
programme.
A fuse/circuit breaker has been tripped.
Check.
The plug is not plugged into the wall
socket.
Check.
The water tap is turned of f.
Check.
Overflow/leaks.
Check.
A whirring sound (the drainage pump)
is heard from the dishwasher and does
not stop when the main power switch is
turned of f.
T urn of f the water tap. Pull out the plug
and call the service department.
Check that the Delayed start option has
not been selected.
Press and hold the main power switch
until the display turns of f if you want to
cancel the Delayed start option. Restart
the dishwasher .

Gorenje GV62010 Specifications

General

Brand	Gorenje
Model	GV62010
Category	Dishwasher
Language	English