What to do if Gorenje Dishwasher shows water inlet fault?
If your Gorenje dishwasher is showing a water inlet fault, check that the water tap is turned on. Also, inspect the outer filter on the inlet hose for blockages and clean it.
How to remove sticky film from dishes in Gorenje Dishwasher?
If your Gorenje dishwasher has a sticky white or blue film on the dishes, the rinse aid dosage might be too high. Reduce the dosage. If you have very soft water, you can dilute the rinse aid 50:50 with water.
How to prevent spots on stainless steel in Gorenje GV642E60?
If you're noticing spots on stainless steel or silver items in your Gorenje dishwasher, it could be due to certain foodstuffs left on them for too long. Rinse off these foods before loading, or consider using the 1h 65° program with the Speed wash option.
How to stop Gorenje Dishwasher from overfilling water?
To address overfilling water in your Gorenje dishwasher, clear the drainage pump. If the problem continues, it is advisable to contact a service center.
General| Brand | Gorenje |
|---|---|
| Model | GV642E60 |
| Category | Dishwasher |
| Language | English |
Check and adjust water hardness settings for optimal dishwashing results.
Configuring basic settings and refilling rinse aid and salt compartments.
Guidance on washing delicate items to prevent damage.
Tips on proper loading for optimal wash and dry results.
How to place items correctly in the upper basket.
Adjusting the height of the upper basket for better loading flexibility.
How to place items correctly in the lower basket.
How to use cutlery baskets and adjustable plate supports.
How to add detergent and use all-in-one options.
Choosing and starting wash programs.
Information on specific programs (Glass, Hygiene, Self-clean) and options.
Stopping, pausing, handling power failures, and unloading dishes.
Adjusting audible feedback for button presses and program end.
Setting the rinse aid dosage for optimal drying.
Adjusting the water softener setting based on water hardness.
Activating the TAB setting for all-in-one detergents.
Accessing error codes and restoring factory defaults.
Instructions for topping up rinse aid and salt.
How to clean the filter and spray arms.
Cleaning the outside, door seal, and running the self-clean program.
Steps to resolve drainage pump blockages and inlet hose filter issues.
List of error codes (F10-F67) and their corresponding actions.
Solutions for unresponsive controls or failure to start.
Addressing dishes not clean, spots, and films.
Fixing rattling sounds, residue, and poor drying.
How to eliminate bad odours and grease deposits.
Important safety precautions for dishwasher installation.
Preparing the installation area and dishwasher for fitting.
How to connect the dishwasher's drainage hose securely.
Connecting to water supply and electrical power.
Information on how to contact customer service for repairs.
Locating and using the article and serial numbers for service.
Key specifications like dimensions, weight, and power.
Where to find product information and energy labelling details online.
To Next Page