473238
The induction hob is fi tted with a residual heat indicator,
automatic cooking-time limiter, Easy Cook function and a
childproof lock. On this page and the following ones, you
can read how to use these facilities.
Switching on and power setting
• Put a pan on a cooking zone.
• For the zone required, turn the knob clockwise to set it
to the desired power. The cooking zones have 9 levels.
Switching o
• Turn the zone o by turning the knob concerned back to
the starting position.
Power
The power for the large zone(s) can be set between 70
and 2300 Watts, for the small zone(s) between 40 and
1400 Watts.
The Easy Cook function is suitable for bringing food to the
boil rapidly and then continue cooking at a lower setting.
The hob will automatically switch to the lower setting to
fi nish cooking.
• Put a pan on a cooking zone.
• For the zone required, turn the knob anticlockwise or
fully to the right. “A” appears in the display.
• Set the desired heat-through setting within 5 seconds
using the rotary knob. If you do not set a heat-through
setting, the zone will be turned o .
Once the heat-through setting has been set, the display
will alternately fl ash “A” and the set heat-through setting.
After the cooking time has elapsed, the fl ashing stops and
the heat-through setting will be continuously shown in the
display.
• Turn the cooking machine o by turning the knob back to
setting 0 or further to setting 9.
Only switch the hob on at setting P if you want to boil
water. This setting is too high for heating butter or milk
and much too high for defrosting. Consult the cooking
tables in the section “Comfortable cooking” to help you
learn the techniques.
Switching on the hob
and setting the power
Easy Cook function
P (power boost) setting
12
OPERATION
To Next Page
Loading...
