What to do if the Gorenje Oven displays an error code (E1, E2, E3, etc.)?
If your Gorenje Oven is displaying an error code (E1, E2, E3, etc.), it indicates an error in the electronic module operation. To resolve this, disconnect the oven from the power for a few minutes, then reconnect it and set the time. If the error persists, it is recommended to call a service technician.
Why is my pastry underdone in my Gorenje Ora-Ito BO737ORAW Oven?
If your pastry is underdone in your Gorenje Oven, ensure that you have selected the correct temperature and heating system. Also, verify that the oven door is completely closed during operation.
How to fix a frozen display on a Gorenje Ora-Ito BO737ORAW?
If the sensors on your Gorenje Oven are unresponsive and the display is frozen, disconnect the appliance from the power mains for a few minutes by either undoing the fuse or switching off the main switch. Then, reconnect the appliance and switch it back on.
General| Type | Built-in oven |
|---|---|
| Energy Class | A |
| Oven Capacity | 71 L |
| Number of Functions | 9 |
| Control Type | Electronic |
| Color | White |
| Oven type | Multifunction |
| Height | 59.5 cm |
| Cleaning type | Catalytic |
| Door material | Glass |
| Designer | Ora-Ito |
| Heating System | Fan |
| Cleaning System | AquaClean |
Details oven parts like controls, guides, doors, and knobs.
Explains accessories like guides, fans, catalytic inserts, and rotisserie.
Identifies and explains control panel buttons and knobs.
Instructions for child lock, signals, and display settings.
Initial setup, including time setting.
Guide to choosing various oven heating modes.
How to set temperature and use timer functions.
Instructions for child lock, signals, and display settings.
Procedures for initiating and ending cooking cycles.
Usage of upper/bottom heat, grill, and hot air modes.
Covers rotisserie, grill with fan, gentlebake, and defrosting.
Instructions for cleaning oven finishes and parts.
Utilizing the Aqua Clean function for oven cleaning.
Guides, inserts, door, glass, and bulb maintenance.
Operating and maintaining door lock and soft closing systems.
To Next Page