Gorilla Playsets 01-7036 - Step 7: Rear Tarp Supports & Sandbox Boards

STEP 7: REAR TARP SUPPORTS & SANDBOX BOARDS
1: INSTALL BOARDS AS SHOWN BELOW.
APPLY UPWARD FORCE ON BOTH REAR TARP SUPPORT
BOARDS WHILE TIGHTENING THE BOLTS. SEE FIG (7.1)
* NOTE POSITION OF COUNTERBORE HOLES.
* NOTE THE DIFFERENT BOLT LENGTHS USED BETWEEN THE TOP & BOTTOM BOARDS.
5/16" Split Lock Washer
COUNTERBORE HOLES
COUNTERBORE HOLES
5/16" Split Lock Washer
SANDBOX BOARD
TOWARDS THE TOP
5/16" Flat Washer
5/16" X 3-1/2" Hex Bolt
SANDBOX BOARD
2470Q
TOWARDS THE TOP
5/16" Flat Washer
2470Q
5/16" x 3-3/4" Hex Bolt
2470AA
REAR TARP SUPPORT
COUNTERBORE HOLES
TOWARDS THE BOTTOM
PUSH UP
AND TIGHTEN BOLTS
FIG(7.1)
REAR TARP SUPPORT
(FRONT AND BACK)
36