Gorilla Playsets 01-7036 - Step 27: Center Post Installation

TARP CENTER POST
2470Z
QTY. (2)
5/16" T-Nut
TARP CENTER POST
2470Z
REAR TARP SUPPORT
5/16 x 1-3/4" Hex Bolt
QTY. (2)
5/16" Split Lock Washer
QTY. (2)
THIS HOLE WILL
REMAIN EMPTY
5/16" Flat Washer
QTY. (4)
! USE TWO WASHERS
HERE ON BOTH SIDES
QTY. (4)
#8 x 1-1/2" Wood Screw
SPEED
SQUARE
90°
90°
DIAGRAM FOR DETAILS.
1: LINE UP THE TOP HOLE OF THE TARP CENTER POST WITH THE REAR TARP SUPPORT HOLE. SEE
STEP 27: CENTER POST
2: SQUARE EACH TARP CENTER POST TO EACH REAR TARP SUPPORT BEFORE ADDING WOOD
SCREWS.
THE REAR TARP
2450AB
SUPPORTS.
TARP CENTER POST
UP
USE THIS HOLE
TO SECURE TO
THIS HOLE WILL
REMAIN EMPTY
NOTE PRE-DRILLS
57