Gorilla Playsets 01-7036 - Step 42: Slide Installation

4"
YOU MAY DRILL 1/8" PILOT
HOLES THROUGH THE CENTER
OF EACH DIMPLE FOR THE
SCREWS.
#14 X 1-1/4" TRUSS HEAD SCREWS
*DO NOT OVER TIGHTEN*
MAKE SURE SLIDES
ARE TIGHT TOGETHER
1: PLACE THE SLIDES CENTERED IN THE OPENING. LAY THE SLIDES ON THE DECK WITH THE LIP EXTENDING ONTO THE
DECK.
STEP 42: INSTALLING THE SLIDES
NOTE: ONCE INSTALLED DO NOT LIFT THE SLIDES.
72