Gotrax EBE3 - Troubleshooting and Warranty; Troubleshooting Guidance; Error Code E02 (Brake Failure); Error Code E07 (Motor Failure)

Troubleshooting Guidance
Troubleshooting tips
E02 The Brake failure
The motor troubleshooting
The accelerator failure
Display communication
failure
E07
E08
E10
Code meaning Troubleshooting clearing
Check the brake connection
cable. If the connection line is
normal, replace the brake
handle.
Check the motor connection
cable. If the connection cable is
normal, replace the motor.
Check the accelerator connec-
tion cable. If the connection
cable is normal, replace the
accelerator.
Check the display connection
cable. If the connection cable is
normal, replace the display.
When the E-bike electric control system fails, the display will show the error codes,
and only when the fault is removed can you exit the fault display program.
After the fault occurs, the E-bikes can't able to continue working.
29