Gotrax ECLIPSE - Page 10

On/OFF machine: Long press 3 seconds the power button to turn on/o, the buzzer will
“di” sound, and the scooter will shut down automatically after 5 minutes without any
oration.
Shift gears: Press the power button to change gears. The speed is 0-3 MPH in pedestrian
mode in 1st gear ( ), 0-15.5 MPH in icon speed in 2nd gear (D), and 0-20 MPH in
icon speed in 3rd gear (S).
Light: Press the power button twice continuously to turn on and o the headlights and
taillights (taillights are slightly bright), the taillights are highly bright when braking, and
the atmosphere lights are automatically lit when starting (breathing light).
Process unit display switch: press the power button three times.
Fixed cruise: Keep the throttle at the same speed for 8-10 seconds, the buzzer will emit a
"di" sound, and the xed cruise icon will light up at the same times to enter the xed
cruise mode. You can exit the cruise mode by twisting the throttle, brake or changing
gears again.
Password lock function:
1. After starting up the scooter, press the throttle once and reset it to increase the password
gure, braking the brake handlebar once and reset it to decrease the password gure, click
the power button to switch the password number, double-click the power button to conrm
that the password input is complete, the standard password is 000.
Scooter Console Functions
On/OFF machine: Long press 3 seconds the power button to turn on/off, the buzzer will
"di" sound, and the scooter will shut down automatically after 5 minutes without any
oration.
Shift gears: Pressthe power button to change gears. The speed is 0-3 MPH in pedestrian
mode in 1st gear( Q 0-15.5 MPH in icon speed in 2nd gear (D), and 0-20 MPH in
icon speed in 3rd gear (S).
Light: Pressthe power button twice continuously to turn on and off the headlights and
taillights (taillights are slightly bright), the taillights are highly bright when braking, and
the atmosphere lights are automatically lit when starting (breathing light).
Process unit display switch: press the power button three times
Fixed cruise: Keep the throttle at the same speed for 8-10 seconds, the buzzer will emit a
"di" sound, and the fixed cruise icon will light up at the same times to enter the fixed
cruise mode. You can exit the cruise mode by twisting the throttle, brake or changing
gears again.
Password lock function:
I. After starting up the scooter, press the throttle once and reset it to increase the password
figure, braking the brake handlebar once and reset it to decrease the password figure, click
the power button to switch the password number, double-click the power button to confirm
that the password input is complete, the standard password is 000.
12