Brake adjustment: If the brake is too tight against the brake, turn the brake cable nut
counterclockwise to loosen the brake cable, if the brake is too loose, turn the brake wcable
nut clockwise to tighten the brake cable. (Figure 2)
Tightening the Tiller: If you notice that the tiller is loose or wiggles while riding, you can
tighten the screws. Open the plastic cover, and use the Allen wrench to tighten the screws
as shown in the gure below. (Figure 1)
Figure 1 Figure 2
Tightening the Tiller: If you notice that the tiller is loose or wiggles while riding, you can
tighten the screws. Open the plastic cover, and use the Allen wrench to tighten the screws
as shown in the figure below. (Figure I)
Brake adjustment: If the brake is too tight against the brake, turn the brake cable nut
counterclockwise to loosen the brake cable, if the brake is too loose, turn the brake wcable
nut clockwise to tighten the brake cable. (Figure 2)
Figure 1 Figure 2
16
To Next Page
Loading...
