To Next PageTo Next Page
Need help?Do you have a question about the Goulds Pumps J5S and is the answer not in the manual?
General| Brand | Goulds Pumps |
|---|---|
| Model | J5S |
| Category | Water Pump |
| Language | English |
Jet pumps with built-in jet assemblies for maximum lift of 25'.
Pumps usable for shallow wells (to 25') or deep wells (over 25').
Jet assemblies for deep well applications (over 25').
Guidelines for plumbing codes, pipe materials, and avoiding air traps.
Instructions for suction pipe sizing, foot valves, and preventing air leaks.
Details on installing discharge piping, including priming ports and tank connections.
Specifications for suction and drive water pipes for twin pipe systems.
Steps for installing the jet assembly, venturi, and foot valve in a twin pipe system.
Requirements for suction pipe and casing seal for packer systems.
Instructions for installing the packer assembly and adapter into the well.
Connecting the suction pipe to the packer adapter at the well head.
Importance of pressure control valves for deep well pump operation.
Guidelines for installing Goulds Pumps Hydro-Pro Water System tanks.
Steps to prime a shallow well jet pump system, including venting.
Procedure for priming deep well jet pump systems with venting.
Safety and wiring instructions for connecting the motor to power.
Basic instructions for booster systems, referencing diagrams.
Instructions for draining the pump and piping to prevent freezing.
Details on dual voltage motors, terminal boards, and voltage change plugs.
Specifications for A.O. Smith motors used with Goulds Pumps.
Explanation of tailpipe function to prevent breaking suction.
How to interpret vacuum gauge readings for suction lift.
Lists common symptoms like motor not running or low delivery and their causes.
