44
Testing For Leaks
WARNING
You should always check for gas leaks
every time you disconnect and recon
-
nect a gas fitting. Never ignite burners
when leak checking.
To test for gas leaks, apply a mixture of
soapy water with a brush to the high-
lighted areas and any cracks along the
hose. If a leak is present the solution will
bubble.
If there is a leak at the hose to oven
connection, re-tighten the fitting with a
spanner and check for leaks by apply-
ing a soap-and-water solution to the
highlighted areas with a brush. If a leak
persists turn off the gas and DO NOT
OPERATE THE OVEN.
If there is a leak at the valve connection,
remove LPG cylinder. Do not operate
oven. Use a different LPG cylinder and
recheck for leaks with the soap-and-wa-
ter solution.
To Next Page
Loading...
