3
PARTS & SERVICE
In order to preserve the UL Listing for the motor,
do not attempt to service the motor. For products
serviced outside the factory, the UL nameplate
must be defaced to indicate that the equipment
may no longer meet the requirements for UL List-
ing. This does not apply to products serviced out-
side the factory under the UL program for Rebuilt
Motors for Use in Hazardous Locations.
For warranty consideration, parts, or other service
information, please contact your local distribu-
tor or the GPI Customer Service Department in
Wichita, Kansas U.S.A., during normal business
hours at:
1-800-835-0113
To obtain prompt, efcient service, always be pre-
pared with the model number of your pump, the
serial number or manufacturing date code of your
pump, and part descriptions and numbers.
For warranty work, always be prepared with your
original sales slip or other evidence of purchase
date.
Please contact GPI before returning any parts.
GPI can inform you of special requirements you
will need to follow.
CAUTION: Do not return the pump or parts
without prior approval from the GPI Customer
Service Department. Due to strict government
regulations, GPI cannot accept parts unless they
have been drained and cleaned.
TOOLS & SUPPLIES NEEDED
Wire Crimper/Stripper
Pliers
Adj. Wrench
7/16 Wrench
Utility Knife
Pipe Wrench
CONTENTS CHECKLIST
(J)
Fuse
Manual
Nozzle
(F)
Tank Adapter
(B)
Pump Assembly
with Spin Collar
(Suction pipe not included)
(A)
Pump Assembly
(A)
(G)
Discharge Hose
(H)
Wire Connector
(E)
90° Street Elbow
(D)
15” - 40” Telescoping Suction Pipe (2 pc)
15” - 25” Telescoping Suction Pipe
25” - 40” Extension Pipe
(C)
Spin Collar
Gasket
with Easy Spin Collar
Before proceeding with installation
determine if the pump will be temporarily or permanently wired to
your vehicle.
Temporary Wiring
Alligator Clamps
(Not included)
Permanent Wiring
Terminal Post Rings
(Not included)
Thread Tape
To Next Page
