GPI M-150S - Product Specifications

MAINTENANCE /
REPAIR
TROUBLESHOOTING OPERATION
ASSEMBLY /
INSTALLATION
SAFETY /
SPECIFICATIONS
GETTING STARTED
5-EN
SPECIFICATIONS
M-150S-AU
M-150S-MU
M-150S-EM
M180S-ML
M180S-AU
M240S-MU
Housing Material
Lightweight, corrosion-resistant, cast aluminum body
Pump Rate
Up to 15 GPM
(57 LPM)
Up to 18 GPM
(68 LPM)
Up to 15 GPM
(57 LPM)
Duty Cycle 30 minute ON, 30 minute OFF
Suction Lift
Manual Nozzle: Up to 5.5 ft. (1.7 m)
Automatic Nozzle: Up to 4.8 ft. (1.5 m)
Operating
Temperature
-20° F to 125° F (-29° C to 52° C)
Operating
Pressure
15 PSI (103.42 kPa)
Input 12-volt DC 24-volt DC
Current Draw 18 amps 20 amps 9 amps
Motor
1900 RPM, 1/5 hp (150
watts)
2000 RPM,
1/4 hp (187 watts)
1900 RPM,
1/5 hp (150 watts)
Motor Approval
cULus Listed, Class I Div 2, Class I Div 1 (pump-only models)
Motor Protection 20 amp circuit breaker
25 amp circuit
breaker
15 amp fuse
Cord 18 ft. of 12 ga. (5.5 m)
Fuse 25 amp 30 amp 15 amp
Tank Adapter
(Item D)
2 inch NPT N/A 2 inch NPT
Inlet 1 inch NPT
Outlet 3/4 inch NPT 1 inch NPT 3/4 inch NPT
Hose Type Buna-N Electrically Conductive Discharge Hose
Hose Size
3/4 in. x 12 ft.
(3.6 m)
3/4 in. x 10
ft. (3.0 m)
1 in. x 12 ft.
(3.6 m)
3/4 in. x 12 ft.
(3.6 m)
Manual Nozzle 3/4 inch Unleaded 1 inch Leaded 3/4 inch Unleaded
Automatic Nozzle 3/4 inch Unleaded N/A
Weight:
Manual Nozzle
23 lbs. (10.5 kg)
26.5 lbs.
(12.0 kg)
23 lbs. (10.5 kg)
Weight:
Automatic Nozzle
24 lbs. (10.8 kg)
27 lbs.
(12.2 kg)
N/A