GPS TK06A - User Manual

Explains the meaning of device indicator lights.

Troubleshooting steps for location failure issues.

Steps to resolve issues with tracking on the platform.

Lists the primary features and capabilities of the GPS tracker.

Details the technical specifications including dimensions and weight.

Steps to prepare for device installation, including checking accessories and SIM card.

Guidelines for discreet and effective device placement within a vehicle.

Details the function and meaning of the device's indicator lights.

Resets all device parameters to factory defaults using an SMS command.

Instructions on how to change the device's password via SMS command.

How to set or delete authorized phone numbers for device control.

How to get the device's current location via SMS or by calling it.

Command to retrieve the device's current location information via SMS.

Instructions to enable or cancel continuous automatic tracking of the device.

How to switch between tracking and voice monitoring modes using SMS commands.

Setting up virtual geographic boundaries to trigger alerts when crossed.

Configuring the device to alert when a set speed limit is exceeded.

Enables an alarm when the vehicle ignition (ACC) is turned on.

Adjusting the device's time zone setting via SMS command.

Configuring the device's APN, user name, and password for GPRS communication.

Setting the IP address and port number for GPRS communication.

Remotely disabling the vehicle's oil or circuit via SMS command.

Remotely restoring the vehicle's oil or circuit via SMS command.

Alerts when the device loses main power, using its backup battery.

Verifying the current IP, port, and APN settings of the device.

Information on accessing the web-based platform for GPS tracking.