GpsGate GPS1195 - Vehicle Loop Detector; Pin Configuration

GPS1195 Auto Gate Manual Version 3
Features
The GPS1195 Auto Gate is unique in the Parking Industry. It comes with a full size PLC controller for
Maximum flexibility, functionality and reliability, while maintaining traditional economy and
serviceability. There is no Onsite programming required
Features Listed Below:
 The PLC controller works in either 120vac or 240vac 50 or 60HZ
 Plug in solid state printed circuits
 Automatic instant reverse time delay to provide smooth operation in both directions resulting in
lower wear as well as reduced heat and power consumption
 Maximum run timers for both directions to prevent continuous cycling of barrier arm
 Low voltage solid state optically isolated inputs
 Output circuits are isolated dry contacts
 Auxiliary monitoring contact supplied for detectors
 Auxiliary vend outputs for doors, gate operators
 Low voltage limit switches for a maximum life & reliability
 Full size PLC Controller with all operational functions
 Built in low voltage 200MA power supply for peripheral devices 24vdc
 Reduced heating & power requirements
 Communication capabilities
Page 5